Opens in a new tab
←
All terms
Problem SolvingUpdated 16 November 2026

PDCA (Plan-Do-Check-Act)

PDCA (Plan-Do-Check-Act) is a four-step improvement method for planning a change, testing it, evaluating the evidence, and deciding whether to adopt, revise, or abandon it. In practice, PDCA starts with a defined problem and enough investigation to justify a test. Plan establishes the proposed change, expected outcome, and measurement approach. Do implements the change within…

PDCA (Plan-Do-Check-Act) is a four-step improvement method for planning a change, testing it, evaluating the evidence, and deciding whether to adopt, revise, or abandon it.

In practice, PDCA starts with a defined problem and enough investigation to justify a test. Plan establishes the proposed change, expected outcome, and measurement approach. Do implements the change within an agreed scope. Check compares observed results with expectations and examines unintended effects. Act determines the next step, including another cycle when the evidence remains inconclusive.

For example, an order-processing team might test a revised intake form for two weeks to reduce requests returned for missing information. Its Plan would define what counts as an incomplete request and establish the current return rate. During Check, the team would compare that rate with the pilot results and examine whether the form increased handling time. A lower return rate accompanied by longer processing times would require a decision about the trade-off before wider adoption.

Within Lean Six Sigma, PDCA can structure pilot testing during DMAIC’s Improve phase. DMAIC provides separate Measure and Analyze phases when baseline reliability or competing causes need investigation. PDCA can also include root cause analysis within Plan; its suitability depends on the evidence needed for the decision. After adoption, standard work documents the revised method, while a control plan assigns monitoring responsibilities and specifies when the process owner should intervene.

At a glance
Updated16 November 2026
No results